# What is the maximum distance between fence posts?

What is the maximum distance between fence posts? As a rule, you should set fence posts about 1800mm to 2400mm apart. The spacing of the posts depends on the type of fence you build, the terrain, the purpose of the fence, and other such factors. Drive in stakes at the exact position where the post holes are to be dug.

Can fence posts be 10 feet apart? Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.

How far apart are fencing posts? Fence posts should be 60cm deep in the ground and spaced 1.8m apart.

How far apart do you put 4×4 fence posts? Mark the locations for the 4″ x 4″ posts. On-center spacing (center of post to center of post) may be 4′, 6′ or 8′ depending on the size of the fence panels. Rest the posts on the string, all on the same side. Ensure that the spacing at the corners is never less than 2′.

## What is the maximum distance between fence posts? – Related Questions

### Is 2 feet deep enough for fence posts?

2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.

### How long should post be for 6 foot fence?

The deeper the post hole is, the sturdier your fence will be. The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post.

### What size Post do you use for an 8 foot fence?

A common rule of thumb, is to dig the hole 3 times as large as the post, and to a depth of 1/3-1/2 of the post height above ground. so for a 8′ high fence, using 4×4 posts. dig the holes 12″ in diameter, to a depth of 2 1/2 – 4′. Of course, that’s assuming you’re setting the posts in concrete.

### How do you calculate the space between fence boards?

Divide the total spaces area by the number of pickets plus one: 33 divided by 18 equals 1.83 (inches). This is the precise width of each space between pickets (and between the pickets and posts).

### How far apart should timber fence posts be?

Posts are usually set 2m to 2.7m apart for a fence up to 1.8m high. To make sure all the posts will be in a straight line, set both corner posts first. Dig holes 600mm deep x 300mm square. For fences higher than 1.8m, set your post about 1m into the ground.

### How do you calculate fence posts?

Equations used in the fence calculator

Number of posts = (fence length / post spacing) + 1 (round the result up) Number of sections = number of posts – 1. Post length = fence height * 1.5. Total number of rails = number of rails per section * number of sections.

### Should fence posts be 6 or 8 feet apart?

Fence posts should be set six to eight feet apart on a 6 foot wood fence. Do not go beyond eight feet or the fence may not be stable enough.

### Should you put concrete around fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.

### Can pressure treated posts be set in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. Concrete should be poured around the post – no concrete under the post.

### How many bags of concrete do you need for a fence post?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

### Does a fence post need to be below the frost line?

All fence posts should be cemented in the ground below frost level. Check your local frost level and dig deeper by at least 6″.

### How deep should a 12 foot fence post be?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.

### How deep should a 8ft post be?

How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.

### How high is a garden fence allowed to be?

The laws actually state that a fence can be as high as 100 meters. However, this is only allowed if proper planning permits have been obtained. This means that any fence under 2 meters in height does not require a permit. This simple law has a few complications to it.

### What is the tallest privacy fence you can buy?

A privacy fence would be solid material (wood or vinyl), and you’d want it to be as high as possible, most likely six feet high.

### Should there be a gap between fence boards?

When building a solid privacy fence, the fence boards are either butted tightly together, or spaced 3/8 to 1/4 inch apart to allow the wood to expand and contract in wet and dry weather. The board-on-board style of fence is often used as a “good neighbor” fence, since it is equally attractive on both sides.

### Can you put fence boards tight together?

For solid privacy fences, the fence boards can be butted tightly together or spaced 3/8 to 1/4 inch apart to allow for wood expansion and contraction during varying weather conditions.

### Should a fence touch the ground?

Should the Fence Touch the Ground? In most cases, no fence materials other than your fence posts should touch the ground. Allowing your fence to touch the ground makes yard maintenance more difficult and may increase the speed at which your fence suffers moisture damage, depending on the fence material used.

### How far apart are woven wire fence posts?

Woven wire puts strain on the posts so it is important to brace the fence by placing posts in the ground eight feet apart and four feet into the ground.

### How deep should a fence post be UK?

The 2 ft Rule

Lawsons experts recommend you should dig a hole which has a depth of 2 ft (24 in / 600mm) to ensure you have a stable timber or concrete fence post.

### How long will a treated 4×4 post last in the ground?

A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil. There are a few factors that influence how long the 4×4 can last in the ground.